Precor P80 manual Plugging In the Power Cord

Assembling the Treadmill 31

4. Adjust the rear feet as needed.

Figure 15: Leveling foot adjustment

5.Repeat steps 1 through 4 until the treadmill is level.

6.If necessary, adjust the rear feet so that the user’s weight is distributed evenly on the treadmill.

Plugging In the Power Cord

CAUTION: Use the supplied power cord. Do not remove or otherwise bypass the 3-prong plug with an adapter to use a non-grounded outlet. Do not plug the unit into a power transformer in an attempt to adjust the voltage requirements. Failure to follow these instructions might damage the unit and void the Precor Limited Warranty.

After assembly is complete, plug the power cord into an appropriate outlet.

Important: The treadmill requires a 20-amp individual branch circuit grounded per NEC (National Electric Code) guidelines or local region electric code.