Precor P80 manual Viewing Your Workout Status While Exercising

54 Operating and Maintaining the P80 Console

Adjust the motion controls, upward or downward, to change the incline, speed, or resistance.

Figure 17: Adjust motion controls up or down

Many preset workouts will adjust these settings automatically to meet the workout intensity. At any time during a workout, you can adjust control settings and override the default workout settings.

Viewing Your Workout Status While Exercising

The Status Bar contains status measurements and is visible across the top of the viewing screen. Information displayed in the Status Bar helps you measure how your body is responding to the exercise session. The default status measurements displayed are:

Total Distance

Calories Burned

Time Remaining

Average Speed (displayed as strides per minute, pace, or RPM depending on equipment type)

Heart Rate

You can modify how a measurement appears in the Status Bar. For example, you can view the length of your exercise session as time elapsed, or as time remaining.

There are two ways to modify the display:

Change the default value setting.

Change the view on the Status Bar.

To modify the status measurement using the Status Bar:

1.On the Status Bar, touch the corner arrow on the status category to pull down the menu.

2.On the drop-down menu, touch an alternate display measurement to display in the Status Bar.

The alternate measure moves to the top of the Status Bar and replaces the default measurement. The menu closes.