Precor P80 manual Reassembling the Treadmill Fairing, To reassemble the fairing

42 Assembling and Maintaining TRM 800-Series Treadmills

Reassembling the Treadmill Fairing

After the console is in place, reattach the two cover panels of the treadmill fairing.

Important: In the following procedure, do not allow the fasteners to break or pinch any cables.

To reassemble the fairing:

1.Verify that the cable assembly is secure inside the cable clips and that the ferrite bead on the base unit data cable is tied securely into place in the left arm of the treadmill.

2.Snap the rear cover into place and attach the seven screws you removed with it earlier.

Figure 27: Removal and replacement of the rear fairing cover

3.Hold the center column cover in place and attach the two screws you removed with it.

Figure 28: Removal and replacement of the center column cover