Precor P80 manual To thread cables through the frame, Component, Appearance, point

22 Assembling and Maintaining TRM 800-Series Treadmills

To thread cables through the frame:

1.Feed the cable assembly downward through the left-hand upright support and out through the opening in the lower end of the support. Drape the remaining cable over the front of the support and tape it into place if necessary to secure it temporarily.

2.Feed the cable assembly through the grommet in the left-hand side bracket of the base frame. Connect the individual cables as shown in the following illustration and table.

Figure 8: Cable connections and mounting points in the treadmill base

Table 1. Cable connections and mounting points in the treadmill base

Component	Appearance	Lower connection
		point
Base unit data	Flat with silver insulation
cable
Ethernet cable	Flat with black insulation