Precor Connecting Cables P80, Cable connections, P80 console, P80 internal cable connections

Installing the Console 33

4.Tilt the console forward until it stops. Use one hand to steady the console in this position, or ask your assistant to do so.

5.Using a #2 Phillips screwdriver, remove the two #8-32 x ¹₂” pan-head machine screws securing the upper back cover of the fairing, as shown in the previous figure. Set the cover and the screws aside.

Connecting Cables (P80)

After the console has been seated, separate the individual cables out of the end of the cable assembly and attach them to the appropriate circuit connectors inside the console. Refer to the following diagram and table to identify the cables and connectors.

Figure 19: Cable connections, P80 console

Table 2. P80 internal cable connections

Cable	Connector Type	Circuit
		Connector
		Location
Ethernet (LAN)	Eight-contact modular, on
	round black cable