Precor P80 manual Cable connection points inside EFX base

Models: P80

1 120
Download 120 pages 61.1 Kb
Page 80
Image 80
Figure 6: Cable connection points inside EFX base

22Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 883 / 833 / 823

8.Pull the end of the cable upward through the opening just behind the lift motor, as shown in the previous illustration.

9.Attach the cable to the appropriate connector inside the base of the EFX, as shown in the following illustration and table.

Important: Install coaxial cable using a torque wrench and torque to not exceed 8 lb-in. If a torque wrench is not available, install the coaxial cable using a wrench to “snug + ¼ turn.” It is permissible to use a wrench on the internal nut to aid the tightening process.

Figure 6: Cable connection points inside EFX base

Connect …

To …

The console power

The power connector on the jack panel

cable (red and

 

black, individual

 

leads)

 

The television

The coaxial connector on the jack panel

cable (black and

 

round)

 

The Ethernet cable

The eight-connector modular jack on the

(black and flat)

jack panel

10.Repeat steps 7 through 9 for the remaining cables you want to install.

Page 80
Image 80
Precor P80 manual Cable connection points inside EFX base