Precor P80 manual Assembling the EFX, To prepare the EFX for assembly, Chapter

Chapter 1

Assembling the EFX

WARNING	You will need the assistance of two other
	people to assemble this unit. DO NOT
	attempt assembly by yourself.

Important: The instructions in the following procedures are described from the perspective of a person standing directly in front of the equipment (that is, on the opposite side of the control console from a person using the equipment). These descriptions may not match the names of certain parts in the parts list, because such parts are named relative to the back of the equipment.

To prepare the EFX for assembly:

Open the box and assemble the components in the sequence presented in this guide.

Assemble and operate your equipment on a hard, level surface in the area intended for use.

Use a hand truck or furniture dolly to move the EFX unit.

Important: Do not grasp the unit by any of its plastic parts to move it. The plastic parts are non-structural covers and are not capable of supporting the weight of the unit.

Provide ample space around the unit.

Assemble the equipment according to the guidelines in this manual to ensure that you do not void the Precor Limited Warranty.

Important: Any damage caused during installation is not covered by the Precor Limited Warranty.