Precor RBK 800 warranty To view the Club Parameters settings, 5 1 5 6

20 Operating and Maintaining the P30 Console

Note: On self-powered equipment, the battery initializes when you begin working out. You must maintain a minimum rate of motion for the Welcome banner to appear.

The changes made in System Setting modes become the default settings when the display resets to the Welcome banner.

CAUTION: If you change the Unit of Measure display on the treadmill, check the speed setting to verify that it is correct.

To view the Club Parameters settings:

1.At the Welcome banner, press Pause.

2.Press the following number keys in sequence to enter the password:

5 6 5 1 5 6 5

3.Press OK.

The Set Club Parameters banner appears.

Table 2. Navigational keys for the system setting modes

Key Function

▲or ▼ Guides you through the settings menu and selections.

OK	Select a menu selection.
BACK	Returns to the previous menu level without saving
	changes.
PAUSE	Exits the System Settings mode and returns to the
	Welcome banner.