Premier Mounts PP-FCTA-QL installation instructions Installation Instructions, Page, Pp-Fcta-Ql

PP-FCTA-QL

Step 1. Thread each braided cable through the Quick Lock, the mounting hole in the corner of ceiling mount, and then completely through the opposite side of the Quick Lock to secure.

To relieve tension on the braided cable, slide the release pin on the Quick Lock.

Step 2. Adjust the braided cable tension. but do not overtighten.

Step 3. When adjusting the tension of the weight-bearing side of the Quick Lock, the cable must be pulled through the Quick Lock until the desired tension is attained. Once attained, pull the braided cable through the other side of the Quick Lock.

Step 4. Once the tension has been adjusted, be sure that there is at least 6” of excess braided cable on the non-weight bearing side of the Quick Lock.

Step 5. Use cable cutters to remove any remaining braided cable (optional).

Braided

Cable

6” Excess-

Braided

Cable

Quick

Lock

Ceiling

Tile

T-Bar

Frame

Installation Instructions Page 9