Premier Mounts PWM-F110 Wall Stud Location

PWM-F110

Page - 10 - Installation Manual

Wall Stud Location

1. Using a (commercially available) wood stud finder, locate four 16" or 24" stud centers behind the wall.

Once found, make a pencil marking on the center of the wood studs (Figure 9).

NOTE: The wall plates have (3) 16" and (1) 24" mounting slot positions (see Technical Specifications on

Page 17)

2. Measure from the floor to the desired viewing height and mark the wall.

NOTE: This marking will reference the center of your flat panel display once mounted on the wall

(Figure 10).

16"

Figure 9 Figure 10

NOTE: Although not depicted in the illustrations shown above, the width of this wall mount will

encompass four wall studs (three wall studs if 24” apart).

ood studs

behind the

wall

structure.

Mark the wall and

the center of the

wood

studs.

Wood Stud Finder

(Commerciall

available)

Measure and

mark the

viewing height

desired on the

all.

16”