PWM-F110
Installation Manual Page - 9 -
CLFigure 5 Figure 6
7. The Griplates™ have M4, M5, M6 and M8 hole patterns to fit the hardware that your flat panel requires.
EXAMPLE: If your flat panel uses M8 x 20 Phillip screws, use the M8 mounting points (Figure 7).
8. Once the mounting brackets are aligned, secure the Griplate™ to the flat panel. Use (1) Griplate™ per
mounting point (Figure 8).
NOTE: The dimples of the top plates have to be facing up and the bottom dimples must be facing down.
DIMPLES
FACING UP
3/4"
DIMPLES
FACING UP
DIMPLES
FACING DOWN
DIMPLES
FACING DOWN
Figure 7 Figure 8
Bottom of the
F
lat Panel
Align the Mounting
Brackets
Mounting Bracket
Bottom of Flat
P
anel
Center of
Viewin
g
Guide
Center of Flat
P
anel
Bottom of Flat
P
anel
Dimples Facing
U
p
M4 M5 M8 M6
Screw Driver