XL6000CM
M4 x 10mm
Knurl Knobs
XL6000CM Projector Bracket Installation Instructions
| Safety Strap | |
| (Qty | |
with the | ||
HC5000/6000 | ||
(Qty 1) | ||
projector | ||
| ||
| Safety Strap | |
M4 x 10mm Knurl | (Qty | |
with the | ||
Knobs (Qty 2) | XL55OU/650 | |
| projector | |
M4 x 10mm Phillips | M4 x 10mm | |
Security Head | ||
Head Screw (Qty 3) | ||
Screws (Qty 3) | ||
|
Premier Mounts
3130 E. Miraloma Ave.
Anaheim, CA 92806
Phone: (800)
XL6000CM
Mounting
Bracket
HC5000
Safety
Strap
HC5000 Safety Bracket Installation
1.Once the XL6000CM has been attached to the projector, the safety strap must be attached to the mounting bracket.
2.Place the safety bracket over the mounting holes and insert two (2) M4 x 10mm knurls knobs and tighten.
M4 x 10mm
Knurl Knobs
XL6000CM
Mounting
Bracket
XL55OU
Safety
Strap
M4 x 10mm Phillips |
Head Screw |
XL6000CM |
Mounting |
Bracket |
XL55OU Safety Bracket Installation
1.Once the XL6000CM has been attached to the projector, the safety strap must be attached to the mounting bracket.
2.Place the safety bracket over the mounting holes and insert two (2) M4 x 10mm knurls knobs and tighten.
| Mounting |
| Point |
Mounting | Mounting |
Point | Point |
Screwdriver
M4 x 10mm Phillips Head Screw
Projector
Projector
1.Invert the projector and place it on a soft and flat surface. Remove any foot levelers that might possibly prevent the correct installation of the bracket.
2.Locate the three mounting points located on the bottom of the projector.
3.Line up the mounting points on the projector with the mounting holes on the XL6000CM mounting bracket.
1.Using a screwdriver, secure the XL6000CM mounting bracket using three
(3) M4 x 10mm Phillips Head screws. Do not over tighten these screws. Overtightening the screws may result in damaging the threaded inserts on the projector.
Please refer to the Base Box Installation Instructions to attach the Base Box to the XL6000CM mounting bracket.
The projector (shown above) is for illustration purposes only.
Installation Instructions | Page 9 |