Premio Computer Premio Apollo/Shadowhawk Computer manual Power Saving LED Connector JGL1, Pin LED

CHAPTER 2 HARDWARE INSTALLATION

Power Saving LED Connector: JGL1

JGL1 can be connected with two-color LED. There are two types of LED that you can use: 3-pin LED or 2-pin LED (ACPI request). When the 2-pin LED is connected to JGL1, the light will turn green, when system is On. During sleep mode, the 2-pin LED will change color from Green to Orange. For 3-pin LED, when LED is connected to JGL1, this will light when the system is On and blinks when it is in suspend/sleep mode.

1 +

3

JGL1

3-pin LED		2-pin LED
Green Color		Green Color
	Orange		Orange
	Color		Color
1	3	1	3
1-2	Single Color	1-2 Dual Color
1-3	Blink

2-24