CONTROLS & CONNECTIO NS
2.7 Power
Power Connection
The power jack on your ACP-88 accepts a standard IEC cord like those found on most computers and professional recorders. Your ACP-88 contains a custom built; internal power supply, no wall wart. This way you can be assured of clean power and rugged construction that will last!
Power Selection
Before powering up your ACP-88 for the first time, be sure to check the position of the power selector switch on the back of the unit. Make certain that the power voltage level selected matches that of your country’s correct power requirements. The arrow on the outside ring of the power selector switch should be aligned with the appropriate voltage. This can be accomplished by inserting a small screwdriver into the slot on the power selector switch and aligning the correct setting beneath the arrow on the outside ring of the power selector switch.
Power Switchl=ON 0=OFF. (hmmm… .)
