Manuals / Presonus Audio electronic / Home Audio / Stereo Amplifier

Presonus Audio electronic DigiMAX LT user manual Controls & Connections, Sample Rate Selector

Models: DigiMAX LT

1 15
Download 15 pages 1.49 Kb
Page 6
Image 6
CONTROLS & CONNECTIONS 2

CONTROLS & CONNECTIONS 2

Clip - The LED labeled CLIP indicates at a signal level of +22dB. Care should be taken to avoid using signal levels that cause this LED to become active. Signal levels that reach or exceed this amount of output will cause undesirable artifacts (distortion) in the channel output signal that is being indicated by this LED. The signal level is reduced by rotating the channel’s control counter-clockwise.

Sample Rate Selector

The section at the extreme right of the front panel contains the sample rate selector switch with LED indicators provided for 32k, 44.1k and 48k. This section also contains a switch labeled EXT. CLOCK. When this switch is engaged the operating clock rate of 32k, 44.1, or 48k will be determined by the incom- ing signal from an external device through the word clock in input on the back panel of the DigiMAX LT.

4

Page 5 Page 7
Page 6
Image 6
Presonus Audio electronic DigiMAX LT user manual Controls & Connections, Sample Rate Selector
Page 5 Page 7

FAQ

What does the CLIP LED indicate?

The CLIP LED indicates a signal level of +22dB. Caution should be taken to avoid using signal levels that cause this LED to become active to prevent distortion in the channel output signal.

What does the sample rate selector switch do?

The sample rate selector switch allows you to choose between 32k, 44.1k, and 48k sample rates. The EXT.CLOCK switch determines the clock rate based on the incoming signal from an external device through the word clock input on the back panel of the DigiMAX LT.

How can I prevent signal level clipping and distortion?

To prevent signal level clipping and distortion, reduce the signal level by rotating the channels control counter-clockwise if the CLIP LED is active.