CONTROLS & CONNECTIONS 2
2.2 BACK PANEL BASIC LAYOUT
115/230 VAC ~
(by internalPOWER jumpers)
20WATTS
CREATED,
DESIGNED
AND
MANUFACTURED
IN THE USA
| WORD CLOCK |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| CHANNEL 8 | CHANNEL 7 | CHANNEL 6 | CHANNEL 5 | CHANNEL 4 | CHANNEL 3 | CHANNEL 2 | CHANNEL 1 |
IN | OUT | 7 | 5 | 3 | 1 |
|
|
|
|
|
|
|
|
| CHANNEL INSERT POINTS |
|
|
|
|
|
|
|
| ||
| adat™ |
|
|
|
|
|
|
|
|
|
|
|
| optical |
|
|
|
|
|
|
|
|
|
|
|
| interface | 8 | 6 | 4 | 2 |
|
|
|
|
|
|
|
| DIGITAL |
|
|
| MICROPHONE - XLR | MICROPHONE - XLR MICROPHONE - XLR | MICROPHONE - XLR MICROPHONE - XLR | MICROPHONE - XLR MICROPHONE - XLR MICROPHONE - XLR | ||||
| AUDIO |
|
|
| LINE INPUT - TRS | LINE INPUT - TRS | LINE INPUT - TRS | LINE INPUT - TRS | LINE INPUT - TRS | LINE INPUT - TRS | LINE INPUT - TRS | LINE INPUT - TRS |
| OUTPUT |
|
|
|
|
|
|
|
|
|
|
|
Digital Optical Output
An adat™ optical output (lightpipe) is provided on the rear panel of the DigiMAX LT. Eight simultaneous 24bit outputs are possible when using the optical out.
Word Clock Out/In
The word clock output and input are accessed through separate BNC con- nectors. The internal sample rate can be set to send 32k, 44.1k, or 48k. The word clock in scans the incoming information and automatically synchs to the necessary sample rate.
Insert
Each channel of the DigiMAX LT has an insert that sends and returns the signal from the associated channel. This insert can be very useful for dynamics processing (such as compressing, limiting, etc.) or for monitoring purposes by helping in overcoming the time discrepancy that may be encountered in some digital recording situations. For more detailed instructions on uses and wiring of the inserts please see the application guide at the end of the manual. This insert is wired as follows:
Sleeve
Ring
Tip
Tip Sleeve
TIP = Send
RING = Return
SLEEVE = GND
Ring
5
