I V . A S S E M B L Y

SEAT INSTALLATION

It may be necessary to install the seat either prior to initial opera- tion or after transporting your power chair. Most seats are at- tached to the power base with the Universal Mounting System (UMS). The UMS consists of universal parts that may be at- tached to any medium-back or high-back seat, regardless of seat width or seat depth. The two main components are aluminum extrusions mounted to the seat base. These extrusions attach to a pair of trapeze bars that are mounted to the power base.

WARNING! Do not pick up the seat frame by the armrests. They are free to pivot, and you may lose control of the seat if they do so.

To install the seat:

1.Set the trapeze bars to the desired height or raise the power elevating seat actuator 5 cm (2 in.) to allow for sufficient clearance. To change the trapeze bar height, see V. “Com- fortAdjustments.”

2.Tilt the seat back and slide the rear extrusion onto the power seat frame or rear trapeze bar. See figure 11.

3.Lower the front extrusion onto the power seat frame or front trapeze bar until the seat locks into place.

4.Flip the seat latch safety down. See figure 12.

WARNING! Make sure the seat latch safety is flipped down before using your power chair.

5.Install the controller into one of the armrests. See V. “Com- fortAdjustments.”

6.Loosen the rear shroud fasteners and remove the rear shroud.

7.Route the controller connector to the back of the power base and secure the controller cable to the armrest receiver with wire ties.

MANDATORY! Prevent controller harness damage! Avoid routing the controller harness on the outside of the armrest pad. Route the harness under the armrest or toward the inside of the armrest pad. Use correct tie-down points for the controller harness to prevent the harness from getting caught in the drive tyres, pinched in the seat frame or damaged when passing through doorways.

8.Plug the controller connectors into the power pod and con- nect the battery connector. See figure 7.

9.Reinstall the rear shroud and tighten the fasteners.

FRONT EXTRUSION

 

 

REAR TRAPEZE BAR

FRONT TRAPEZE

REAR EXTRUSION

BAR

Figure 11. Universal Mounting System (UMS)

SEAT LATCH SAFETY

FRICTION LOCK

LEVER

POWER SEAT FRAME

Figure 12. UMS - Power Elevating Seat System

22

www.pridemobility.com

Jazzy 1103 Ultra

Page 21 Page 23
Page 22
Image 22
Pride Mobility 1103 manual Seat Installation, To install the seat
Page 21 Page 23

1103 specifications

Pride Mobility 1103, a flagship mobility scooter model, epitomizes comfort, performance, and reliability for individuals seeking independence in their daily lives. This scooter is designed with advanced technologies and user-friendly features, making it an excellent choice for both indoor and outdoor use.

One of the key features of the Pride Mobility 1103 is its robust power system. Equipped with a high-performance battery, this scooter boasts a competitive driving range, allowing users to navigate their surroundings without frequent recharges. The powerful dual motors ensure agility and responsiveness, making it easy to handle different terrains, including sidewalks and slight inclines.

The design of the Pride Mobility 1103 emphasizes user comfort. It features an adjustable seat with enhanced cushioning and armrests, providing a pleasant riding experience for extended periods. The flip-back arms further improve accessibility, making it convenient for users to get in and out of the scooter. The swivel seat adds an additional layer of ease, allowing users to face any direction effortlessly.

Safety is another cornerstone of the Pride Mobility 1103. This scooter includes a comprehensive lighting system, with bright front headlights and rear reflectors, ensuring visibility during low-light conditions. Equipped with a safety belt and anti-tip wheels, it promotes stability and confidence when navigating various environments.

In terms of control and navigation, the Pride Mobility 1103 features an intuitive tiller that can be adjusted for optimal positioning. The control panel is designed for ease of use with clear indicators for battery life, speed, and direction. This simplicity allows users to enjoy a seamless driving experience without unnecessary complications.

Durability is paramount in the construction of the Pride Mobility 1103. Built with high-quality materials, it is designed to withstand regular use while maintaining its sleek appearance. The scooter’s sleek, modern design is not only aesthetically pleasing but also functional, with ample storage options available for personal items.

In conclusion, the Pride Mobility 1103 stands out as a versatile mobility scooter that combines powerful performance, comfort, and safety features. This model caters to the diverse needs of users, allowing them to regain their mobility and independence, enhancing their quality of life in the process. Whether used for daily errands or leisurely outings, the Pride Mobility 1103 is engineered to deliver an exceptional driving experience.
Top Page Image Contents