V I I . C A R E A N D M A I N T E N A N C E

WARNING! Power chair batteries are heavy. See specifications table. If you are unable to lift that much weight, be sure to get help. Use proper lifting techniques and avoid lifting beyond your capacity.

WARNING! Do not mix or match new and old batteries. If you encounter a situation where one battery needs to be replaced, then replace both batteries. Refer to the specification table in this manual and the manual supplied with the battery charger for recommended type and capacities.

To replace the batteries:

1.Turn off the power to the controller.

2.Make sure that the power chair is in drive mode. See III. “Your Power Chair.”

3.Loosen the rear shroud fasteners. See figure 6.

4.Remove the rear shroud.

5.Unplug the battery connector. See figure 27.

6.Disconnect the wiring harness from the rear battery.

7.Disconnect the controller from the power pod. See figure 7.

8.Pull up on the friction lock lever and remove the seat.

9.Remove the retaining pin from the foot platform and lift the platform off of the power base. See figure 18.

10.Turn the yellow fastener and remove the centre shroud.

11.Disconnect the wiring harness.

12.Remove the rear battery.

13.Slide the front battery tray forward.

14.Disconnect the wiring harness from the front battery.

15.Remove the front battery.

16.Place a new rear battery onto the power base. Make sure that the terminals are facing forward.

17.Place a new battery in the front of the battery tray. Make sure that the terminals are facing each other.

WARNING! Use only the quick disconnect harness supplied with your power chair. It has a thermal fuse on each lead.

18. Connect the wiring harnesses to the front battery. See figure 27.

WARNING! Make sure you tighten the fasteners so that the connections are secure.

19.Connect the wiring harnesses to the rear battery. See figure 27.

20.Slide the battery tray back into the power base.

NOTE: Make sure that the power pod is out of the way when reinstalling the batteries.

21.Place the centre shroud back on top of the power base and secure the yellow fastener.

22.Reinstall the foot platform.

23.Reinstall the seat.

24.Reconnect the battery connector.

25.Reconnect the controller to the power pod.

26.Reinstall the rear shroud and tighten the fasteners.

27.Charge the batteries. See VI. “Batteries and Charging.”

Jazzy 1103 Ultra

www.pridemobility.com

39

Page 38 Page 40
Page 39
Image 39
Pride Mobility 1103 manual To replace the batteries
Page 38 Page 40

1103 specifications

Pride Mobility 1103, a flagship mobility scooter model, epitomizes comfort, performance, and reliability for individuals seeking independence in their daily lives. This scooter is designed with advanced technologies and user-friendly features, making it an excellent choice for both indoor and outdoor use.

One of the key features of the Pride Mobility 1103 is its robust power system. Equipped with a high-performance battery, this scooter boasts a competitive driving range, allowing users to navigate their surroundings without frequent recharges. The powerful dual motors ensure agility and responsiveness, making it easy to handle different terrains, including sidewalks and slight inclines.

The design of the Pride Mobility 1103 emphasizes user comfort. It features an adjustable seat with enhanced cushioning and armrests, providing a pleasant riding experience for extended periods. The flip-back arms further improve accessibility, making it convenient for users to get in and out of the scooter. The swivel seat adds an additional layer of ease, allowing users to face any direction effortlessly.

Safety is another cornerstone of the Pride Mobility 1103. This scooter includes a comprehensive lighting system, with bright front headlights and rear reflectors, ensuring visibility during low-light conditions. Equipped with a safety belt and anti-tip wheels, it promotes stability and confidence when navigating various environments.

In terms of control and navigation, the Pride Mobility 1103 features an intuitive tiller that can be adjusted for optimal positioning. The control panel is designed for ease of use with clear indicators for battery life, speed, and direction. This simplicity allows users to enjoy a seamless driving experience without unnecessary complications.

Durability is paramount in the construction of the Pride Mobility 1103. Built with high-quality materials, it is designed to withstand regular use while maintaining its sleek appearance. The scooter’s sleek, modern design is not only aesthetically pleasing but also functional, with ample storage options available for personal items.

In conclusion, the Pride Mobility 1103 stands out as a versatile mobility scooter that combines powerful performance, comfort, and safety features. This model caters to the diverse needs of users, allowing them to regain their mobility and independence, enhancing their quality of life in the process. Whether used for daily errands or leisurely outings, the Pride Mobility 1103 is engineered to deliver an exceptional driving experience.
Top Page Image Contents