V . C O M F O R T A D J U S T M E N T S

WARNING! Failure to heed the following warnings may cause the power chair to tip over.

WARNING! Always fasten the positioning belt when operating the power elevating seat system.

WARNING! Never raise the seat from its lowest position on an inclined surface.

WARNING! Never raise the seat from its lowest position when operating your power chair on bumpy or uneven surfaces.

WARNING! Never raise the seat while your power chair is in the freewheel mode.

WARNING! Maintain recommended tyre pressure in the drive wheel to maintain stability.

Power Elevating Seat Operation

Figure 22. Power Elevating Seat Actuator

If your power chair is equipped with a power elevating seat, you can change the seat height either through the controller or through a toggle switch mounted to one of the armrests.

To operate the power elevating seat:

1.Bring your power chair to a complete stop.

2.Push the toggle switch forward to raise the seat or pull the switch rearward to lower the seat. When you release the switch, the seat will stop.

NOTE: The power elevating seat system has an upper and a lower limit of travel. Once the actuator reaches either one of these limits, you should continue to hear and/or feel the actuator motor running. This is because there is a clutch mechanism that allows the motor to continue running after the actuator has reached its limit. This clutch works at both the top and bottom extensions of the lift.

WARNING! Do not allow the motor to run more than a few seconds after the mechanism reaches the top or bottom limit. This can damage the motor.

The power elevating seat is equipped with a swivel feature that allows the seat to be turned 90 degrees to whichever side the controller is located.

To use the swivel feature:

1.Locate the friction lock lever under the seat. See figure 12.

2.Pull back the friction lock lever to rotate the seat in 90° increments.

3.Pull the friction lock lever forward to lock the seat in place.

WARNING! Do not attempt to drive the power chair with the seat facing to the side. Always return the seat to the forward facing position before operating the power chair.

Jazzy 1103 Ultra

www.pridemobility.com

29

Page 28 Page 30
Page 29
Image 29
Pride Mobility 1103 manual Power Elevating Seat Operation, To operate the power elevating seat, To use the swivel feature
Page 28 Page 30

1103 specifications

Pride Mobility 1103, a flagship mobility scooter model, epitomizes comfort, performance, and reliability for individuals seeking independence in their daily lives. This scooter is designed with advanced technologies and user-friendly features, making it an excellent choice for both indoor and outdoor use.

One of the key features of the Pride Mobility 1103 is its robust power system. Equipped with a high-performance battery, this scooter boasts a competitive driving range, allowing users to navigate their surroundings without frequent recharges. The powerful dual motors ensure agility and responsiveness, making it easy to handle different terrains, including sidewalks and slight inclines.

The design of the Pride Mobility 1103 emphasizes user comfort. It features an adjustable seat with enhanced cushioning and armrests, providing a pleasant riding experience for extended periods. The flip-back arms further improve accessibility, making it convenient for users to get in and out of the scooter. The swivel seat adds an additional layer of ease, allowing users to face any direction effortlessly.

Safety is another cornerstone of the Pride Mobility 1103. This scooter includes a comprehensive lighting system, with bright front headlights and rear reflectors, ensuring visibility during low-light conditions. Equipped with a safety belt and anti-tip wheels, it promotes stability and confidence when navigating various environments.

In terms of control and navigation, the Pride Mobility 1103 features an intuitive tiller that can be adjusted for optimal positioning. The control panel is designed for ease of use with clear indicators for battery life, speed, and direction. This simplicity allows users to enjoy a seamless driving experience without unnecessary complications.

Durability is paramount in the construction of the Pride Mobility 1103. Built with high-quality materials, it is designed to withstand regular use while maintaining its sleek appearance. The scooter’s sleek, modern design is not only aesthetically pleasing but also functional, with ample storage options available for personal items.

In conclusion, the Pride Mobility 1103 stands out as a versatile mobility scooter that combines powerful performance, comfort, and safety features. This model caters to the diverse needs of users, allowing them to regain their mobility and independence, enhancing their quality of life in the process. Whether used for daily errands or leisurely outings, the Pride Mobility 1103 is engineered to deliver an exceptional driving experience.
Top Page Image Contents