V . C O M F O R T A D J U S T M E N T S

Anti-Tip Wheels

 

The anti-tip wheels are designed to give your power chair

 

increased stability on rough surfaces. The anti-tip wheels

ANTI-TIP WHEEL

are preset at the factory for smooth surfaces or indoor

 

use only. If you plan on using your power chair on rough

 

surfaces, it may be necessary to adjust the anti-tip wheels

 

to better suit your needs. The anti-tip wheels may need

 

adjustment if the following occurs:

 

! When coming to a stop, your power chair tips for-

 

ward excessively.

 

! The anti-tip wheels constantly rub the ground.

A

 

WARNING! Consult your authorised

B

 

Pride Dealer before attempting to

 

change the anti-tip wheel height!

 

Changing the anti-tip wheel height

Figure 21. Anti-TipWheel Assembly

affects handling under acceleration!

 

WARNING! The higher you raise the anti-tip wheels, the more you increase your power chair’s tendency to tilt forward while decelerating. You can compensate for this by having your authorised Pride Dealer make a small adjustment to the pre-programmed deceleration setting in the controller or by moving the seat assembly farther to the back of your power chair.

PROHIBITED! Do not remove the anti-tip wheels.

NOTE: Each drive tyre (pneumatic only) must be inflated to 2.4 bar (35 psi) and the user must also be seated in the power chair in order to properly adjust the anti-tip wheels.

To adjust the anti-tip wheels:

1.Loosen bolt A. See figure 21.

2.Remove bolt B.

3.Raise or lower the anti-tip wheel bracket. Each hole is 1.27 cm (0.50 in.) apart.

4.Reinstall bolt B.

5.Tighten boltA.

6.Raise or lower the other anti-tip wheel so that it is at the same height.

Power Elevating Seat System (Standard)

The power elevating seat system is equipped with a power elevating seat actuator that enables you to raise and lower the seat automatically. See figure 22. The power elevating seat system can enhance the capabilities of the power chair several ways:

!By raising the seat, you extend your level of reach to allow more freedom and independence in many environments.

!By raising or lowering the seat, you can easily adjust the seat height to any surface to which you want to transfer.

!By raising the seat, you are closer to the eye level of standing persons. This provides better interaction.

For all the benefits your power elevating seat system can provide you, there are limitations. Observe the following precau- tions in order to ensure safe use of the power elevating seat system.

MANDATORY! Read and understand this owner’s manual thoroughly before operating the power chair.

28

www.pridemobility.com

Jazzy 1103 Ultra

Page 27 Page 29
Page 28
Image 28
Pride Mobility 1103 manual Anti-Tip Wheels, To adjust the anti-tip wheels, Power Elevating Seat System Standard
Page 27 Page 29

1103 specifications

Pride Mobility 1103, a flagship mobility scooter model, epitomizes comfort, performance, and reliability for individuals seeking independence in their daily lives. This scooter is designed with advanced technologies and user-friendly features, making it an excellent choice for both indoor and outdoor use.

One of the key features of the Pride Mobility 1103 is its robust power system. Equipped with a high-performance battery, this scooter boasts a competitive driving range, allowing users to navigate their surroundings without frequent recharges. The powerful dual motors ensure agility and responsiveness, making it easy to handle different terrains, including sidewalks and slight inclines.

The design of the Pride Mobility 1103 emphasizes user comfort. It features an adjustable seat with enhanced cushioning and armrests, providing a pleasant riding experience for extended periods. The flip-back arms further improve accessibility, making it convenient for users to get in and out of the scooter. The swivel seat adds an additional layer of ease, allowing users to face any direction effortlessly.

Safety is another cornerstone of the Pride Mobility 1103. This scooter includes a comprehensive lighting system, with bright front headlights and rear reflectors, ensuring visibility during low-light conditions. Equipped with a safety belt and anti-tip wheels, it promotes stability and confidence when navigating various environments.

In terms of control and navigation, the Pride Mobility 1103 features an intuitive tiller that can be adjusted for optimal positioning. The control panel is designed for ease of use with clear indicators for battery life, speed, and direction. This simplicity allows users to enjoy a seamless driving experience without unnecessary complications.

Durability is paramount in the construction of the Pride Mobility 1103. Built with high-quality materials, it is designed to withstand regular use while maintaining its sleek appearance. The scooter’s sleek, modern design is not only aesthetically pleasing but also functional, with ample storage options available for personal items.

In conclusion, the Pride Mobility 1103 stands out as a versatile mobility scooter that combines powerful performance, comfort, and safety features. This model caters to the diverse needs of users, allowing them to regain their mobility and independence, enhancing their quality of life in the process. Whether used for daily errands or leisurely outings, the Pride Mobility 1103 is engineered to deliver an exceptional driving experience.
Top Page Image Contents