Pride Mobility 1122 Elevating Leg Rests Optional, To adjust the ELR angle, To rotate the ELR

V . C O M F O R T A D J U S T M E N T S

Elevating Leg Rests (Optional)

Elevating Leg Rests (ELRs) offer an infinite range of ad- justment between 0º – 70º for the leg angle and a leg rest adjustment range of 15 – 20 in.

To adjust the ELR angle:

1.Push down release lever B. See figure 20.

2.Move the leg rest to the desired angle.

To rotate the ELR:

1.Push in release lever A. See figure 20.

2.Rotate the ELRs.

To adjust the ELR length:

1.Remove the two screws from the side of each leg rest extension. See figure 20.

2.Slide the leg rest in or out to the desired length.

3.Reinstall the two screws on each leg rest extension.

Power Elevating Seat (Optional)

Your power chair may be equipped with a power el- evating seat actuator. See figure 11. The power elevat- ing seat is equipped with a speed inhibit system that re- duces power chair speed by one-half whenever the seat is elevated more than 1-2 inches. Always check to be sure the speed inhibit system is operating properly be- fore using your power chair, and do not move around in your seat to any great extent when the seat is in the raised position.

The power elevating seat can enhance the capabilities of the power chair in several ways:

!By elevating the seat, your level of reach is extended to allow more freedom and independence in many environments.

!You can easily adjust the seat height to any surface to which you want to transfer. The seat swivels 90 degrees to whichever side the joystick is located.

!By raising your seat, you are closer to the eye level of standing persons. This provides better interaction.

For all the benefits the power elevating seat can pro- vide you, there are limitations.

RELEASE LEVER A

RELEASE LEVER B

LEG REST

EXTENSION

ADJUSTMENT

SCREWS

Figure 20. Elevating Leg Rests

POWER SEAT

SWITCH

Figure 21. Power Seat Switch

Jazzy 1122 www.pridemobility.com 25