V . C O M F O R T A D J U S T M E N T S | ||
Foot Platform Height Adjustment |
| |
The foot platform height is easily adjusted to different heights |
| |
in | FOOT PLATFORM BRACKET | |
To raise or lower the foot platform: |
| |
1. Remove the quick release fasteners from the foot plat- | QUICK RELEASE | |
form bracket. See figure 18. | FASTENERS | |
2. Raise or lower the foot platform to the desired height. |
| |
3. Reinstall the quick release fasteners into the foot plat- |
| |
form bracket and tighten. |
| |
Foot Platform Depth Adjustment |
| |
To adjust the foot platform depth: |
| |
1. Remove the quick release fasteners from the foot plat- |
| |
form bracket. See figure 18. |
| |
2. Move the foot platform in or out to the desired depth. |
| |
3. Reinstall the quick release fasteners into the foot plat- |
| |
form bracket and tighten. |
| |
Quick Release Fasteners: The foot platform is attached | FOOT | |
to the power base with two quick release fasteners. See | ||
PLATFORM | ||
figure 18. Each quick release fastener consists of a bolt, a | RETAINING | |
lever, and a nut. See figure 19. The lever has a cam on the | PIN | |
| ||
end that allows it to clamp into place. The quick release |
| |
fastener has two states: clamped and unclamped. When the |
| |
lever is open, the quick release fastener is unclamped. When |
| |
the lever is closed, the quick release fastener is clamped. | Figure 18. Foot Platform Adjustment |
To clamp the quick release fastener:
1.Make sure the lever is in the open position.
2.Turn the nut clockwise until it is snug.
3.Rotate the lever until it is in the fully closed position.
NOTE: If the lever will not rotate to the fully closed position, then turn the nut counterclockwise
NUT
BOLT
LEVER (FULLY CLOSED)
CAM
UNCLAMPED
CLAMPED
LEVER (OPEN)
Figure 19. Quick Release Fastener Operation
Jazzy 1143 Ultra | www.pridemobility.com | 29 |