V . C O M F O R T A D J U S T M E N T S
MANDATORY! Read and understand this owner’s |
|
manual thoroughly before operating the power chair. |
|
WARNING! Failure to heed the following warnings |
|
may cause the power chair to tip over. |
|
WARNING! Always fasten the positioning belt when |
|
operating the power elevating seat system. |
|
WARNING! Never raise the seat from its lowest |
|
position on an inclined surface. |
|
WARNING! Never raise the seat from its lowest |
|
position when operating your power chair on bumpy |
|
or uneven surfaces. |
|
WARNING! Never raise the seat while your power |
|
chair is in the freewheel mode. |
|
WARNING! Maintain recommended tire pressure in |
|
the drive wheel to maintain stability. | Figure 25. Power Elevating Seat Actuator |
NOTE: The power elevating seat option is equipped with a system that reduces the speed of the power chair by
Power Elevating Seat Operation
If your power chair is equipped with a power elevating seat, you can change the seat height either through the controller or through a toggle switch mounted to one of the armrests.
NOTE: For information on how to raise and lower your seat through the controller, contact your authorized Pride Provider.
To operate the toggle switch:
1.Push the toggle switch forward to raise the seat.
2.Pull back on the toggle switch to lower the seat.
The power elevating seat system has an upper and a lower limit of travel. Once the actuator reaches either one of these limits, you should continue to hear and/or feel the actuator motor running. This is because there is a clutch mechanism that allows the motor to continue running after the actuator has reached its limit. This clutch works at both the top and bottom extensions of the lift.
WARNING! Do not allow the motor to run more than a few seconds after the mechanism reaches the top or bottom limit.
Jazzy 1143 Ultra | www.pridemobility.com | 33 |
