Pride Mobility 1400 Footrest Height Optional, Footrest Angle Optional, Elevating LEG Rests Option

Models: 1400

1 50
Download 50 pages 49.48 Kb
Page 20
Image 20

V I . C O M F O R T A D J U S T M E N T S

FOOTREST HEIGHT (OPTIONAL)

The footrest height is easily adjusted to one of six different heights, in 2.54-cm increments.

To raise or lower the footrest:

1.Remove the 3/8-in. bolt and nut from the footrest. See figure 21.

2.Raise or lower the footrest to the desired height.

3.Install the 3/8-in. bolt and nut into the footrest and tighten.

FOOTREST ANGLE (OPTIONAL)

You can adjust the angle of the footrest with a 3/16-in. hex spanner. See figure 22.

To adjust the footrest angle:

1.Turn the setscrew clockwise to raise the front of the footrest.

2.Turn the setscrew counterclockwise to lower the front of the footrest.

SWING-AWAY FOOTRESTS (OPTIONAL) Swing-away Footrests (SFRs) are an option.They enable you to move the leg rest to the side before you transfer on or off of your Jazzy.

To move the SFRs:

1.Push in the release lever. See figure 23.

2.Move the SFRs.

ELEVATING LEG RESTS OPTION

Elevating Leg Rests (ELRs) offer an infinite range of adjustment for the leg angle and a footrest adjustment range of 30–48 cm.

To adjust the ELR angle:

1.Press the release lever. See figure 24.

2.Move the leg rest to the desired angle.

To adjust the ELR leg rest height:

1.Remove the two screws from the side of each leg rest extension. See figure 25.

2.Loosen the bolt on the side of each leg rest extension.

3.Slide the leg rest in or out to the desired length.

4.Tighten the bolt and reinstall the two screws.

Figure 21. Footrest Height

REMOVE THIS NUT AND BOLT TO

RAISE OR LOWER THE FOOTREST

TURN THIS SETSCREW TO

CHANGE FOOTREST ANGLE

Figure 22. Footrest Angle

SFR RELEASE LEVER

Figure 23. Swing-Away Footrests

20

www.pridemobility.com

Jazzy 1400/Rev C/Sept02

Page 20
Image 20
Pride Mobility 1400 owner manual Footrest Height Optional, Footrest Angle Optional, Elevating LEG Rests Option