Pride Mobility 610 owner manual Swing-away Footrests, To rotate the SFRs, To adjust the SFR length

	V . C O M F O R T A D J U S T M E N T S
12.	Plug the controller connector(s) into the power base.
13.	Reinstall the rear shroud and tighten the fasteners.
Swing-away Footrests		SFR RELEASE LEVER
Swing-away Footrests (SFRs) enable you to rotate the foot-
rests to the side before you transfer onto or off or your power		FOOTREST
chair. See figure 20.		EXTENSION
		ADJUSTMENT
To rotate the SFRs:		SCREWS
1.	Push in the release lever.
2.	Rotate the SFRs.
To adjust the SFR length:		Figure 20. Swing-Away Footrests
1.	Remove the two adjustment screws from the side of
	each footrest extension.
2.	Slide the footrest up or down to the desired length.
3.	Reinstall the two adjustment screws.
Elevating Leg Rests		RELEASE LEVER A
		RELEASE LEVER B
Elevating Leg Rests (ELRs) offer an infinite range of ad-
justment for the leg angle and a footrest adjustment range
of 12–19 in. See figure 21.		LEG REST
		EXTENSION
To rotate the ELRs:		ADJUSTMENT
		SCREWS
1.	Push in release lever A.
2.	Rotate the ELRs.
To adjust the ELR angle:
1.	Push down release lever B.
2.	Move the leg rest to the desired angle.	Figure 21. Elevating Leg Rests

To adjust the ELR length:

1.Remove the two adjustment screws from the side of each leg rest extension.

2.Slide the leg rest up or down to the desired length.

3.Reinstall the two adjustment screws.

ADJUSTMENT	LEG REST HANGER
BOLT
	LEG REST EXTENSION
ADJUSTMENT SCREWS

Figure 22. Heavy Duty Drop-In Leg Rests

26 www.pridemobility.com Jazzy 610