Pride Mobility 610 owner manual Heavy Duty Drop-in Leg Rests, To adjust the forward/back position

	V . C O M F O R T A D J U S T M E N T S
Heavy Duty Drop-in Leg Rests
You can adjust the forward/back position, as well as the
length of the heavy duty drop-in leg rests. See figure 22.
To adjust the forward/back position:
1.	Remove the adjustment bolts from the side rails.
2.	Move the leg rest hanger in or out to the desired
	position.	A
3.	Align the adjustment holes in the leg rest hanger with
		B
	those in the side rail.
4.	Reinstall the adjustment bolts to secure the leg rest
	hangers.	C
To adjust the leg rest length:		D
1.	Remove the adjustment screws from the leg rest exten-
	sion.
2.	Slide the leg rest up or down to the desired length.
3.	Align the adjustment holes in the leg rest extension and
	reinstall the adjustment screws.	A
Multi-Axis Foot Plates
The multi-axis foot plate assembly can be installed on either
a swing-away footrest or an elevating leg rest. The multi-
axis foot plate has four adjustments: leg rest length (A),
position (B), tilt (C), and angle (D). See figure 23.		B
To change leg rest length (A):
1.	Remove the hardware.
2.	Move the leg rest to the desired position.
3.	Reinstall the hardware.
To change foot plate position (B):		C
1.	Remove the hardware.
2.	Move the foot plate to the desired position.
3.	Reinstall the hardware.
To change foot plate tilt (C):
1.	Loosen the hardware.	D
2.	Tilt the foot plate to the desired position.
3.	Tighten the hardware.
To change foot plate angle (D):
1.	Turn the setscrew clockwise to decrease the angle.	SETSCREW LOCATION
2.	Turn the setscrew counterclockwise to increase the
	angle.	Figure 23. Multi-Axis Foot Plate (ELR Shown)

Jazzy 610 www.pridemobility.com 27