I V . A S S E M B L Y

Seat Installation

 

 

 

It may be necessary to install the seat either prior to

 

initial operation or after transporting your power chair.

 

The seat is attached to the power base by a height-

 

adjustable seat pedestal.

 

 

 

WARNING! Do not pick up the seat

 

frame by the armrests. They are free to

 

pivot, and you may lose control of the

 

seat if they do so.

 

 

To install the seat:

 

 

 

1. Adjust the seat height if necessary. See V.

 

“Comfort Adjustments.”

 

 

 

2. Set the seat onto the seat pedestal. See figure 9.

 

3. Install the controller into the armrest, and tighten

WIRE TIES

the setscrew under the armrest.

 

 

4. Lift the armrest straight up, then route the

 

controller harness and secure with wire ties as

 

shown in figure 9.

 

 

 

MANDATORY!

Prevent

controller

 

harness damage! Use correct tie-down

 

points for controller harness. Avoid

 

routing the controller harness on the

 

outside of the armrest pad. Route the

Figure 9. Seat Installation

harness under the armrest or toward

 

the inside of the armrest pad. Use correct tie-down points for the controller harness to prevent the harness from getting caught in the drive tires, pinched in the seat frame, or damaged when passing through doorways.

5.Plug the controller harness into the connector on the power base. See figures 6 and 9.

Select Traveller

www.pridemobility.com

21

Page 21
Image 21
Pride Mobility I NFMANU339 manual Seat Installation, Mandatory

I NFMANU339 specifications

Pride Mobility is renowned for its commitment to creating mobility solutions that enhance the quality of life for individuals with mobility challenges. One standout product in their lineup is the NFMANU339, a mobility scooter designed to offer users unparalleled mobility, comfort, and convenience.

The NFMANU339 features a sleek, modern design that not only provides aesthetic appeal but also enhances functionality. Built with durable materials, this scooter offers exceptional stability and support for users weighing up to 300 pounds. The robust construction ensures that the scooter can withstand daily use, making it ideal for both indoor and outdoor excursions.

One of the key features of the NFMANU339 is its impressive battery life. Equipped with advanced battery technology, this mobility scooter can cover a range of up to 15 miles on a single charge, allowing users to navigate through various terrains without the worry of running out of power. The scooter also comes with a user-friendly charging system, making it easy to recharge when needed.

The ergonomic design of the NFMANU339 ensures user comfort during rides. The seat is fully adjustable, allowing individuals to find their perfect driving position, while the armrests provide additional support. The scooter is also designed with a tight turning radius, making it easy to maneuver in narrow spaces, such as crowded shopping aisles or tight hallways.

Technologically, the NFMANU339 integrates intuitive controls that are easily accessible and simple to operate. Users can adjust the speed settings and engage in directional control with minimal effort. Additionally, the scooter is equipped with LED lighting for enhanced visibility, ensuring user safety during nighttime excursions.

Safety features are paramount in the design of the NFMANU339. It includes anti-tip technology, allowing it to navigate slopes with confidence, and a full suspension system for a smooth ride over bumpy surfaces. The inclusion of a horn and reflectors further enhances the visibility and audibility of the scooter, ensuring that users are seen and heard while on the move.

In summary, Pride Mobility’s NFMANU339 is a feature-rich mobility scooter that blends durability, comfort, and advanced technology. With its impressive range, ergonomic design, and safety features, it stands out as a dependable solution for individuals seeking an enhanced mobility experience, ultimately promoting independence and an active lifestyle.