V I I . C A R E A N D M A I N T E N A N C E

You may need the following to replace your batteries:

metric/standard socket set and ratchet adjustable wrench

To replace the batteries:

1.Lift up on the battery cover and slide the tabs out as shown in figure 17.

2.Disconnect the battery strap.

3.Remove the red (+) positive and black (-) negative battery harness from each battery.

4.Remove the batteries.

5.Place the new batteries into the battery wells with the terminals facing out as shown in figure 18.

6.Reconnect the two battery harnesses to the battery terminals. Make sure the red harness is connected to the (+) positive terminal and the black harness is connected to the (-) negative terminal on each battery.

-

+

+

-

Figure 18. Battery Orientation

7.Reconnect the battery strap making sure the battery harnesses are secured under the battery strap.

8.Reinstall the battery cover by aligning the tabs as shown in figure 17 and pressing down.

When to See Your Authorized Pride Provider for Service

The following symptoms could indicate a serious problem with your power chair. If necessary, contact your authorized Pride Provider. When calling, have the model number, serial number, nature of the problem, and the error code if available.

Motor noise Frayed harnesses

Cracked or broken connectors Uneven wear on any of the tires Jerky motion

Pulling to one side

Bent or broken wheel assemblies Does not power up

Powers up, but does not move

Corrective Maintenance

If the battery condition meter does not light up when you turn on the power:

Check the harness connections. Make sure they are tight.

Check the circuit breaker. Reset it if necessary.

Check the battery connections.

If the above conditions prove normal, you can load test the batteries with a battery load tester. These testers are available at automotive parts stores. Disconnect both batteries before load testing and follow the directions that come with the load tester. If either one of the batteries fails the load test, replace both of them. If your power chair still does not power up, contact your authorized Pride Provider.

Select Traveller

www.pridemobility.com

33

Page 33
Image 33
Pride Mobility I NFMANU339 manual You may need the following to replace your batteries, To replace the batteries

I NFMANU339 specifications

Pride Mobility is renowned for its commitment to creating mobility solutions that enhance the quality of life for individuals with mobility challenges. One standout product in their lineup is the NFMANU339, a mobility scooter designed to offer users unparalleled mobility, comfort, and convenience.

The NFMANU339 features a sleek, modern design that not only provides aesthetic appeal but also enhances functionality. Built with durable materials, this scooter offers exceptional stability and support for users weighing up to 300 pounds. The robust construction ensures that the scooter can withstand daily use, making it ideal for both indoor and outdoor excursions.

One of the key features of the NFMANU339 is its impressive battery life. Equipped with advanced battery technology, this mobility scooter can cover a range of up to 15 miles on a single charge, allowing users to navigate through various terrains without the worry of running out of power. The scooter also comes with a user-friendly charging system, making it easy to recharge when needed.

The ergonomic design of the NFMANU339 ensures user comfort during rides. The seat is fully adjustable, allowing individuals to find their perfect driving position, while the armrests provide additional support. The scooter is also designed with a tight turning radius, making it easy to maneuver in narrow spaces, such as crowded shopping aisles or tight hallways.

Technologically, the NFMANU339 integrates intuitive controls that are easily accessible and simple to operate. Users can adjust the speed settings and engage in directional control with minimal effort. Additionally, the scooter is equipped with LED lighting for enhanced visibility, ensuring user safety during nighttime excursions.

Safety features are paramount in the design of the NFMANU339. It includes anti-tip technology, allowing it to navigate slopes with confidence, and a full suspension system for a smooth ride over bumpy surfaces. The inclusion of a horn and reflectors further enhances the visibility and audibility of the scooter, ensuring that users are seen and heard while on the move.

In summary, Pride Mobility’s NFMANU339 is a feature-rich mobility scooter that blends durability, comfort, and advanced technology. With its impressive range, ergonomic design, and safety features, it stands out as a dependable solution for individuals seeking an enhanced mobility experience, ultimately promoting independence and an active lifestyle.