V I . C O M F O R T A D J U S T M E N T S
Reclining Seat
If your power chair is equipped with a reclining seat, you can adjust the seatback angle with the seatback release lever. The lever is located on the right side of the seat base. See figure 3.
To adjust the seatback angle:
1.Push down on the seatback release lever.
2.Move the seatback down or up to the desired position.
3.Release the lever.
Seatback Angle Adjustment (no seatback release lever)
If your Jazzy is equipped with an adjustable seatback, you can adjust it to four (4) different angles: 90°, 102°, 105°, or 107°.
To adjust the seatback angle:
1.Remove the adjusting screws on both seat hinges. See figure 19.
2.Set the seatback at desired angle.
3.Reinstall the screws on both seat hinges and tighten.
Armrest Width Adjustment
You can change each armrest’s width independently of each other.
NOTE: Changing the armrest width may increase the overall width of your Jazzy.
To change the armrest width:
1.Locate the two armrest knobs on each side of the armrest receiver bracket. See figure 19.
2.Loosen the knobs.
3.Slide the armrests in or out to the desired width.
4.Tighten the knobs.
SEAT
EXTRUSIONS
Figure 18. Seat Mounting Holes
JAM NUT
JAM NUT
ARMREST
KNOB
ADJUSTING
SCREW
Figure 19. Seatback and Armrest Adjustments
24 | www.pridemobility.com | Jazzy 1133 Owner’s Manual Rev B |
