Manuals / Pride Mobility / Personal Care / Mobility Aid

Pride Mobility Jazzy1133 Should your power chair come in contact with water, Temperature

Models: Jazzy1133

1 47
Download 47 pages 54.33 Kb
Page 38
Image 38

I X . C A R E A N D M A I N T E N A N C E

WARNING! Never use any chemicals to clean a vinyl seat, as they may cause the seat to become slippery or dry out and crack. Use soapy water and dry the seat thoroughly.

Your power chair, like most electrical equipment, is susceptible to damage from the elements. Avoid damp areas of any kind.

CAUTION! Direct exposure to water or dampness could cause the power chair to malfunction electronically and mechanically. Water can cause electrical components to corrode and the chair’s frame to rust.

Should your power chair come in contact with water:

1.Dry your power chair as thoroughly as possible with a dry towel.

2.Allow your power chair to sit in a warm, dry place for 12 hours to allow unseen water to evaporate.

3.Check the joystick operation and the brakes before using your power chair again.

4.If you find any inconsistencies, take your power chair to an authorized Pride provider.

Temperature

Some of the parts of your power chair are susceptible to extreme changes in temperature. Always keep your power chair between the temperatures of 18° F and 122° F.

νIn extremely cold temperatures the batteries may freeze. The specific temperature at which they freeze depends on a number of factors, such as battery charge, usage, and composition of the batteries (e.g., AGM or Gel-Cell).

νTemperatures above 122° F may cause your power chair to operate at a reduced speed. This reduced speed is a safety feature built into the controller that helps prevent damage to the motor and other electrical components. See VIII. “Operation.”

Corrective Maintenance

If the battery condition meter does not light up when you turn on the power:

νCheck the harness connections. Make sure they are tight.

νCheck the circuit breaker. Reset it if necessary.

νCheck the battery connections.

If the above conditions prove normal, you can load test the batteries with a battery load tester. These testers are available at automotive parts stores. Disconnect both batteries before load testing and follow the directions that come with the load tester. If either one of the batteries fails the load test, replace both of them. If your power chair still does not power up, contact your authorized Pride provider.

Battery Replacement

The batteries on your power chair are located inside battery boxes, in the power base. See figure 4. For information on how to reconnect the batteries, refer to the battery harness decal which is located inside each battery box. See figure 31.

38

www.pridemobility.com

Jazzy 1133 Owner’s Manual Rev B 03-03

Page 37 Page 39
Page 38
Image 38
Pride Mobility Jazzy1133 owner manual Should your power chair come in contact with water, Temperature, Battery Replacement
Page 37 Page 39

Jazzy1133 specifications

The Pride Mobility Jazzy 1133 is a versatile power chair designed to provide exceptional comfort and mobility to users with limited mobility. This power wheelchair is not only renowned for its sleek design but also for its cutting-edge technology and user-centric features that enhance mobility in a variety of settings.

One of the most notable features of the Jazzy 1133 is its mid-wheel drive design. This allows for a tighter turning radius, making it incredibly maneuverable in indoor spaces, such as homes and shops. The chair is equipped with a powerful motor that provides smooth acceleration and a top speed of approximately 4.5 mph, ensuring users can navigate both indoor and outdoor environments with ease.

Comfort is paramount in the Jazzy 1133, and it comes with a high-back seat that offers luxurious padding and adjustable armrests. The seat height can also be adjusted, accommodating various user needs and preferences. This attention to comfort is essential for users who may need to spend prolonged periods in the chair, as it minimizes the risk of pressure sores and enhances overall user satisfaction.

The Jazzy 1133 features advanced suspension technology, providing a stable ride over different terrains. This means users can traverse grassy areas, sidewalks, and uneven surfaces without compromising comfort or safety. Its robust and durable construction ensures that the chair can withstand daily use while retaining its performance.

In terms of technology, the Jazzy 1133 is equipped with a performance-oriented controller that allows for precise maneuverability. Users can easily navigate their chair with intuitive joystick controls that enable them to move forward, backward, and accommodate various turns. The chair also has programmable settings, allowing users to tailor the chair's performance to their specific needs.

Durability is another hallmark of the Jazzy 1133, featuring strong, puncture-resistant tires that can handle a variety of surfaces. The battery system ensures reliable performance, offering a range of up to 12 miles on a single charge, making it ideal for both short trips and extended outings.

Overall, the Pride Mobility Jazzy 1133 is a thoughtfully designed power wheelchair that combines comfort, technology, and reliability. With its user-friendly features and robust performance, the Jazzy 1133 stands out as a leading choice for individuals seeking a quality mobility solution that meets their varied lifestyle demands.