V I . C O M F O R T A D J U S T M E N T S

COMFORT ADJUSTMENTS

After becoming familiar with your power chair’s operation, you may find the need to make some adjustments to increase your comfort, such as seat height and angle, armrest angle, footrest height and angle, and the controller’s position. If your power chair is equipped with a Synergy Seat or the Versa Tilt, refer to the information provided in separate manuals. If your power chair is equipped with a medium back, a high back, or a reclining seat, refer to the following information.

WARNING! If your Jazzy was configured at your authorized Pride provider or service center, please consult your healthcare professional before changing the seat position or making any other adjustment. Some adjustments may degrade your Jazzy’s performance and safety by changing its center of gravity.

You may need the following to make comfort adjustments:

νmetric/standard hex key set

νmetric/standard socket set and ratchet

νadjustable wrench

Seat Height and Seat Angle Adjustment

There are four steel towers that connect the seat to the power base. These seat towers are fastened to the base with nuts and bolts. See figure 17. You can change the seat height to one of three positions in 1-in. increments by removing these nuts and bolts and raising or lowering the seat towers. If you raise or lower only one set of seat towers (either front set or rear set), you can also change the seat base angle.

To change the seat height or seat angle:

1.Remove the nuts and bolts from each of the four seat towers.

2.Raise or lower each seat pin to the desired position. To change the angle, set either the front or rear seat towers higher or lower than the other.

3.Reinstall the ball detent pin into each seat tower.

SEAT TOWER FASTENERS

SEAT PIN

SEAT TOWER

Figure 17. Seat Tower Detail

Seat Position

You can move the seat forward or rearward by changing the extrusion mounting position.

NOTE: To change the seat position, you must remove the seat.

To change the position:

1.Turn off the power to the controller.

2.Remove the seat. See V. “Disassembly.”

3.Remove both extrusions from the bottom of the seat. See figure 18.

4.Reposition the extrusions on a different set of mounting holes. See figure 18. You must move both extrusions the same number of holes either forward or backward.

5.Reinstall the extrusions onto the bottom of the seat.

6.Reinstall the seat.

Jazzy 1133 Owner’s Manual Rev B 03-03

www.pridemobility.com

23

Page 22 Page 24
Page 23
Image 23
Pride Mobility Jazzy1133 owner manual C O M F O R T a D J U S T M E N T S, Comfort Adjustments
Page 22 Page 24

Jazzy1133 specifications

The Pride Mobility Jazzy 1133 is a versatile power chair designed to provide exceptional comfort and mobility to users with limited mobility. This power wheelchair is not only renowned for its sleek design but also for its cutting-edge technology and user-centric features that enhance mobility in a variety of settings.

One of the most notable features of the Jazzy 1133 is its mid-wheel drive design. This allows for a tighter turning radius, making it incredibly maneuverable in indoor spaces, such as homes and shops. The chair is equipped with a powerful motor that provides smooth acceleration and a top speed of approximately 4.5 mph, ensuring users can navigate both indoor and outdoor environments with ease.

Comfort is paramount in the Jazzy 1133, and it comes with a high-back seat that offers luxurious padding and adjustable armrests. The seat height can also be adjusted, accommodating various user needs and preferences. This attention to comfort is essential for users who may need to spend prolonged periods in the chair, as it minimizes the risk of pressure sores and enhances overall user satisfaction.

The Jazzy 1133 features advanced suspension technology, providing a stable ride over different terrains. This means users can traverse grassy areas, sidewalks, and uneven surfaces without compromising comfort or safety. Its robust and durable construction ensures that the chair can withstand daily use while retaining its performance.

In terms of technology, the Jazzy 1133 is equipped with a performance-oriented controller that allows for precise maneuverability. Users can easily navigate their chair with intuitive joystick controls that enable them to move forward, backward, and accommodate various turns. The chair also has programmable settings, allowing users to tailor the chair's performance to their specific needs.

Durability is another hallmark of the Jazzy 1133, featuring strong, puncture-resistant tires that can handle a variety of surfaces. The battery system ensures reliable performance, offering a range of up to 12 miles on a single charge, making it ideal for both short trips and extended outings.

Overall, the Pride Mobility Jazzy 1133 is a thoughtfully designed power wheelchair that combines comfort, technology, and reliability. With its user-friendly features and robust performance, the Jazzy 1133 stands out as a leading choice for individuals seeking a quality mobility solution that meets their varied lifestyle demands.
Top Page Image Contents