
V . C O M F O R T A D J U S T M E N T S
After you have become familiar with your Jazzy’s operation, you may find the need to adjust the seat. There are some adjustments you can make to increase your comfort such as seat height, armrest angle, footrest height and angle, and joystick position.
WARNING! If your Jazzy was configured at your authorized Pride provider, please consult your healthcare professional before changing the seat position or making any other adjustment. Some adjustments may degrade you Jazzy’s performance and safety by changing its center of gravity.
You may need the following to make comfort adjustments:
νMetric/Standard Hex Key Set
νMetric/Standard Socket Set and Ratchet
νAdjustable Wrench
SEAT HEIGHT
You can change the seat height to one of three positions in one- inch increments.
WARNING! Do not pick up the seat frame by the armrests. They are free to pivot, and you may lose control of the seat if they do so, resulting in personal injury or damage to the chair.
SEAT POST
HEX
HEAD NUT
HEX
HEAD BOLT
To change the seat height:
1.Turn the power off.
2.Make sure the Jazzy is not in freewheel.
3.Unplug the controller and charger inhibit connectors.
4.Pull the seat release lever forward to unlock it.
5Lift the seat up and out of the seat post.
6. Lift off the shroud.
7. Loosen the seat pedestal bolt. See figure 7.
8. Use two wrenches to loosen and remove the hex head nut and bolt. See figure 7.
9. Slide the seat post up or down in the seat pedestal. 10. Align the holes on the seat post and the seat pedestal. 11. Reinstall the hex head bolt and tighten.
12. Tighten the seat pedestal bolt.
13. Reinstall the shroud.
14. Reinstall the seat.
15. Reconnect the controller and the charger inhibit.
SEAT PEDESTAL |
| BOLT |
|
|
| SEAT PEDESTAL |
Figure 7. Seat Height Adjustment
LOOSEN KNOB TO MOVE ARMREST.
Figure 8. Armrest Width
20 | www.pridemobility.com | Jazzy 1103 Rev L/Feb03 |