Pride Mobility jazzy 1120 owner manual I . D I S a S S E M B L Y, Seat Removal, Foot Frame Removal

Models: jazzy 1120

1 49
Download 49 pages 25.24 Kb
Page 24
Image 24
Figure 31. Removing the Seat
Figure 32. Removing the Foot Frame

V I I . D I S A S S E M B L Y

SEAT REMOVAL

Youmaywishtoremovetheseatfortransportation.IfyouhaveaVersa

Seat,pleaserefertotheVersaSeatInstallationandAdjustmentguide.

To remove the seat:

1.Turn the power off.

2.Make sure your Jazzy is not in freewheel mode.

3.Unplug the main wire harness behind the seat.

4.Simultaneously depress the two plungers on the front of the seat frame while lifting the front of the seat. See figure 31.

5.Lifttheseatupandgentlyloweritbackontothefrontseattowers.

6. Pull the seat forward and lift it off of the rear seat towers.

To remove a power seat:

1.Release seat by moving the seat release lever rearward.

2.Lift up the power seat plate.

3.Lift the seat off of the actuator.

FOOT FRAME REMOVAL

The foot frame helps protect the Jazzy components from the envi- ronment. See figure 32. You must remove the foot frame in order to change the batteries and check the cable connections.

To remove the foot frame:

1.Turn the power off.

2.Make sure your Jazzy is not in freewheel mode. See IV.

“The Jazzy 11202000.”

3. Locate the 5/15-in. pin at the base of the footplate bracket and remove.

4. Lift the foot frame straight up approximately 2 inches and pull toward you.

WARNING! Your Jazzy 11202000 batteries weigh approximately 44 lbs. each. Lifting weight above your capability could result in injury.

BATTERY REMOVAL

To remove the batteries:

1.Turn the power off.

2.Remove the foot frame.

3.Disconnect the quick disconnects by pulling them toward you.

4.You can now remove the batteries from your Jazzy.

24

Jazzy 11202000

Page 24
Image 24
Pride Mobility jazzy 1120 owner manual I . D I S a S S E M B L Y, Seat Removal, Foot Frame Removal, Battery Removal