I V . T H E J A Z Z Y 1 1 2 2
ELECTRONICS TRAY
The electronics tray is located on the rear of your Jazzy. The electronics tray is located underneath the rear sliding door. The electronics tray consists of the ammeter, the battery charger plug, the main circuit breaker, accessory connector (optional equipment), and the controller harness connectors.
νAmmeter: The ammeter displays the charger’s current output in amps. For more information, see IX. “Bat- teries and Charging” in this manual.
νBattery Charger Plug: This plug is used whenever your battery needs recharging.
νMain Circuit Breaker: The main circuit breaker is a safety feature built into your Jazzy. When the batteries and the motors are heavily strained (e.g., from excessive loads), the main circuit breaker trips to prevent damage to the motors and the electronics. If the circuit trips, allow your Jazzy to “rest” for approximately one minute. Next, push in the circuit breaker button, turn on the joystick controller, and continue normal operation. If the main circuit breaker continues to trip repeatedly, contact your authorized Pride provider.
νAccessory Connector (Optional): This is where the optional harness connects to the controller (power seat, lighting).
νController Harness Connectors: This is where the joystick connects to the motors, batteries, and charger. If your Jazzy is equipped with a Remote Plus or Europa controller, there is only one connector on the tray. If your Jazzy is equipped with a Pilot controller, there are two connectors on the tray. See figures 3 through 5 to view the controller harness connectors.
νPower Seat Connector (Optional): This is for the optional power seat switch. See figure 6.
REMOTE PLUS CONTROLLER HARNESS CONNECTOR
MAIN
CIRCUIT
BREAKER
AMMETER BATTERY CHARGER PLUG
OPTIONAL POWER SEAT CONNECTOR LOCATION
Figure 6. Electronics Tray
18 | WWW.PRIDEMOBILITY.COM | JAZZY 1122/REV D/FEB 03 |