Pride Mobility Jazzy 600 2S, Jazzy 600 3SP To adjust the leg rest length, Multi-Axis Foot Plates

	V . C O M F O R T A D J U S T M E N T S
To adjust the leg rest length:
1.	Remove the adjustment screws from the leg rest exten-
	sion.
2.	Slide the leg rest up or down to the desired length.
3.	Align the adjustment holes in the leg rest extension and
	reinstall the adjustment screws.
Multi-Axis Foot Plates		A
The multi-axis foot plate assembly can be installed on either
		B
a swing-away footrest or an elevating leg rest. The multi-
axis foot plate has four adjustments: leg rest length (A), po-
sition (B), tilt (C), and angle (D). See figure 23.		C
To change leg rest length (A):		D
1.	Remove the hardware.
2.	Move the leg rest to the desired position.
3.	Reinstall the hardware.
To change foot plate position (B):		A
1.	Remove the hardware.
2.	Move the foot plate to the desired position.
3.	Reinstall the hardware.
To change foot plate tilt (C):
1.	Loosen the hardware.	B
2.	Tilt the foot plate to the desired position.
3.	Tighten the hardware.
To change foot plate angle (D):
1.	Turn the setscrew clockwise to decrease the angle.
2.	Turn the setscrew counterclockwise to increase the
	angle.	C
		D
		SETSCREW LOCATION
		Figure 23. Multi-Axis Foot Plate (ELR Shown)

Jazzy 600 Series www.pridemobility.com 29