I X . D I S A S S E M B LY A N D A S S E M B LY

ASSEMBLY

1.Pull up on the manual freewheel lever. Putting your Boxster in freewheel may make it easier for you to maneuver the rear section because the drive wheels are free to turn. See figure 7.

2.Position the front and rear sections of your Box- ster as shown in figure 16.

3.Align the lower slots on the rear of the front sec- tion to the corresponding pegs on the front of the rear section. See figure 17.

4.Gently push the front section of your Boxster to- wards the rear section until the curved locking brackets are fully connected onto the rear pegs.

5.Insert the ball detent pin.

6.Place the frame locking levers in the locked posi- tion. See figure 18.

7.Raise the tiller to the upright position by turning the tiller adjustment lever until it is loose. Raise the tiller to the desired position. Verify that the tiller release buttons are reengaged, and the tiller adjustment lever is tight.

8.Connect the large, white, 9-pin front-to-rear con- nector (located on the harness coming out of the Boxster’s front section) to the connector’s mating socket (found near the front of the Boxster’s rear section). See figure 14.

9.Place the batteries in the battery wells (see figure 18) then reconnect the battery straps.

10.Connect the 2-pin battery harnesses into the mat- ing harnesses that extend from the electronic con- troller module. See figure 13.

11.Gently place the rear shroud over the seat pedes- tal and slide it down into position. The Velcro fasteners will hold it in place.

12.Carefully lift the seat and slide the seat post (on the bottom of the seat frame) into the seat pedes- tal.

13.Rotate the seat until it locks into place to com- plete the assembly of your Boxster.

POSITION FRONT AND REAR SECTIONS

FRONT FRAME HANDLE

Figure 16. Front and Rear Sections

CONNECT FRAME HALVES HERE

Figure 17. Frame Lock

LOCKED POSITION

BATTERY

WELLS

Figure 18. Frame Locking Levers

28

Boxter

Page 27 Page 29
Page 28
Image 28
Pride Mobility PMV520VBLU, PMV520OBLK, PMV520HGRN, PMV520CRED owner manual D I S a S S E M B LY a N D a S S E M B LY, Assembly
Page 27 Page 29

PMV520VBLU, PMV520CRED, PMV520OBLK, PMV520HGRN specifications

The Pride Mobility PMV520 series, encompassing models PMV520HGRN, PMV520OBLK, PMV520CRED, and PMV520VBLU, represents a significant advancement in personal mobility solutions. Designed with both functionality and user comfort in mind, these mobility scooters are ideal for individuals seeking independence while navigating varied terrains.

One of the standout features of the PMV520 series is its robust construction and stylish design, available in vibrant colors like Green, Black, Red, and Blue. Each model is built to accommodate users weighing up to 300 pounds, ensuring durability without sacrificing aesthetic appeal. The sleek body design not only offers eye-catching looks but also enhances maneuverability in congested spaces and tight corners.

The performance of the PMV520 scooters is powered by a high-efficiency motor that provides a maximum speed of 5.25 mph. This allows users to travel short distances quickly while maintaining safety and stability. The scooter’s range is equally impressive, achieving up to 15 miles on a full charge. Its long-lasting battery makes it a reliable option for daily outings and errands.

The PMV520 series incorporates advanced stability technology, with a four-wheel configuration that improves traction and control. Additionally, the suspension system absorbs shocks, making for a smoother ride across uneven surfaces. The comfortable, adjustable seat ensures that users can find the perfect driving position, while the specifically designed tiller allows for easy steering and operation.

Safety is paramount in the design of the PMV520 scooters. Each model is equipped with automatic braking systems and bright LED headlights for enhanced visibility during low-light conditions. The scooters have intuitive controls that are easily accessible, allowing for user-friendly operation, even for those with limited mobility or experience.

In conclusion, the Pride Mobility PMV520 series, including PMV520HGRN, PMV520OBLK, PMV520CRED, and PMV520VBLU, is engineered to deliver superior performance, stability, and style. With its combination of powerful features, state-of-the-art technology, and user-centric design, it provides an excellent solution for anyone seeking to enhance their mobility and independence.
Top Page Image Contents