V I I I . C O M F O R T A D J U S T M E N T S
TILLER ANGLE ADJUSTMENT
WARNING! Remove the key before adjusting the tiller. Do not attempt to adjust the tiller while the scooter is in motion.
You can adjust the tiller to many positions. The tiller adjustment lever locks the tiller in place. It has a
1.Turn the tiller adjustment lever counterclockwise until it is loose. If the tiller adjustment lever comes in contact with the tiller basket, pull it outward, turn it clockwise, and release it. Continue to loosen until the tiller is able to move. See figures 9A and 9B.
2.Move the tiller to a comfortable position.
3.Turn the tiller adjustment lever clockwise until it is tight. If the tiller adjustment lever comes in contact with the tiller basket, pull it outward, turn it counterclockwise, and release it. Continue to turn the lever until it is tight. The tiller may be lowered to the center of the floorboard and locked in place for storage. See IX. “Disassem- bly and Assembly.”
PULL OUT TO REPOSITION
TILLER ADJUSTMENT
LEVER
|
| TILLER BOOT |
| TILLER | |
|
| ||||
|
|
|
|
| RELEASE |
| TILLER RELEASE |
| BUTTON | ||
|
|
| BUTTON |
|
|
|
|
|
|
| |
FIGURE 9A. ADJUSTING THE TILLER ANGLE | FIGURE 9B. REPOSITION TILLER ADJUSTMENT LEVER | |
(TILLER BOOT REMOVED FOR CLARITY) | ||
|
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to one of three different heights. See figure 10.
1.Remove the seat from your Victory. See IX. “Dis- assembly and Assembly.”
2.Use the attached ring to pull and remove the ball detent pin from the lower seat post.
3.Raise or lower the upper seat post to the desired seat height.
4.While holding the upper seat post at that height, match up the holes in the upper seat post and the lower seat post.
5.Fully insert the ball detent pin.
6.Replace the seat.
SEAT PEDESTAL
LOCATING HOLES
UPPER SEAT POST
LOWER SEAT
POST
BALL DETENT PIN
FIGURE 10. SEAT HEIGHT ADJUSTMENT
24 | Victory |
