Primera Technology AP360, 74293R, AP362 quick start Tip! See for a Label Path diagram

6.Now position the stock to correspond with the general area where it will be applied to the container.

7.Pull the loose end of the label stock forward and then push it into the Feed Area from the back of the label applicator. The labels will come out just underneath the Peel Edge. (Figure 2-5.)

Figure 2-5.

Tip! See Section 5 for a Label Path diagram.

8.Pull approximately 12 inches of label stock out beyond the Peel Edge. (Figure 2-6.)

Figure 2-6.

6 AP360/362 Label Applicator