![](/images/new-backgrounds/1205317/20531727x1.webp)
TOC
INDEX
17.Remove the packing tape from the rewinder dancer arm and move it into the up (starting) position.
Figure
4X
!Warning: To prevent serious injury you must bolt the CX1200 to a table or bench. Use the included lag bolts and predrilled holes in the base.
18.Locate the power converters and the printer power cord. Connect power to the printer and switch on the power. Connect the power to the back of the rewinder and unwinder. Switch on the power.
Figure
I
O
ON
OFF
Congratulations! Your CX1200 is setup!
10 Unpack and Assemble