![](/images/new-backgrounds/1205317/20531733x1.webp)
TOC
INDEX
3.The loose stock should fall on the right side of the roll. Turn the tension knob clockwise to secure the roll to the chuck. Turn the knob as as tight as you can! Feed the stock under the dancer arm and through the cutter.
Figure
Dancer Arm | Cutter |
Note: To track supply roll usage, remember to enter the length of the roll using the instructions in Section 6.5.
Tension Knob
4.Continue feeding the stock into the printer feeder tray. Feed the stock under the green guides and under the paper feed roller. Stop feeding when the leading edge of the stock has covered the red stop block printed just outside the feeder door entrance.
Figure
Green Guides
Feed Roller
Red Stop Block
Load Label Stock 13