Primera Technology CX1200 specifications Other Warnings

TOC INDEX

6.Fuser Heat tolerance - wrinkling, bubbling, burning, Breaking, Curling

7.Water Tolerance

8.Scratch Tolerance

9.Cut quality

10.Lamination Quality

Note 1: Test at least 100 feet of continuous material before determining compatibility. Some Plastic stocks will initially appear to be compatible. However over time, the material absorbs too much heat so that not enough is left over to fuse the toner to the surface of the material.

Other Warnings

Do NOT print on die-cut label materials or on web widths of less than 8.5” (215mm). Labels should always be die-cut as a post process on a separate piece of finishing equipment. Printing on die-cut materials is dangerous. Adhesive bleed can easily ruin the Image Transfer Unit (ITU) and fuser. A label that pre-dispenses inside the unit can cause physical damage to the printer.

42 Media Recommendations