5.Along the Vertical axis of the printed disc, find the number whose lines touch. For example, in the above illustration, the number would be 2. Enter that number into the Vertical box of the Calibration window and 0 would be entered for the Horizontal axis.
6.Select the OK button. Your images should now be centered when printed on a disc.
After your selections have been made, close out of the printer setup window. You are now ready to go to an application program and print. All printer driver selections will stay the same until you change them.
Enable Ink Low Warning
This setting lets you enable or disable the warning from the printer to tell you when the ink cartridges are getting low.
Ink Levels and Cartridge Maintenance
Select this button to display the current ink levels as well as options for cleaning and changing cartridges.
