To disable the Guest account follow this procedure:
1.From any computer that can access the XRn, open a remote desktop connection. Go to Start - All Programs - Remote Desktop Connection.
Note: You may also hook up a monitor and keyboard to the XRn to gain access. If this is the case, skip to step 4.
2.In the window that appears type the name of the XRn.
This information can most easily be found on the XRn itself
by pressing the 
button at the main menu of the LCD Control Panel. The name will be in the following format:
3.Click Connect.
4.You will be prompted for a username and password. Enter the following to access the Administrator account:
Username: XRnAdmin
Password: NetworkDP1
You now have full access to the XRn computer
5.Go to User Accounts
6.Click XRnGuest
7.Select turn off guest account.
You will now need to add the XRn to a workgroup or to a domain so that users will be able to send jobs to it. Workgroups are typically found on smaller networks. Domains are found on medium to large networks. If you don't know what either of these are and you don't have a network administrator then you probably will want to add the XRn
to a workgroup. Follow the instructions below to add the XRn to a work group.
1.Right click on the My Computer Icon on your desktop
2.Click on the Computer Name tab.
3.In the Workgroup box type the name of the existing work- group. To find the name of the workgroup, perform this same three step procedure on an existing computer. The workgroup name should already be populated. Use this same name for the XRn.
If you have a domain, ask your network administrator to add the XRn to the domain using the same procedure they would use to add any other new computer.
10Hardware and Software Setup
