TOC | INDEX |
are using. For the discs that Primera sells, use the following guide for Inner Diameter:
−38.3 mm for Primera's ToughCoat CDR
−24.9 mm for the Hockey Rink Disc, Business Card Disc and 80mm CD
•Outer Margin
The Outer Margin refers to where the printing will cut off around the outer edge of your disc. The size of the printable surface can vary from one type of media to the next. This allows you to set the outer margin in millimeters allowing you to print all the way to the edge regardless of the type of disc you are using.
•Config Utility
This button launches the Configuration Utility. This Utility is also available in the Print Center by selecting the Disc Publisher and clicking the Configure Icon. This utility is used to report ink levels, clean and change ink cartridges, and align your color and black cartridges for optimal print quality. In addition, this utility will allow you to center and adjust your printed image. Refer to section
•Enable Low Ink Warning
The Low Ink Warning basically keeps you from printing discs if one ore more of the colors in your ink cartridge are running out. Your Bravo monitors the amount of ink used when printing and will stop printing if one or more of your colors is within 10% of being empty, and the LEDs on the top will flash in unison. If you press the Cartridge button on the top of the Bravo it will continue to print, but you will want to closely monitor the discs that print. If discoloration occurs, you are most likely out of one or more colors and will want to change cartridges. Please refer to section
•Save As Default
The Save As Default button will save the current settings as the
•Restore Defaults
The Restore Defaults button will restore the driver settings to the factory defaults.
42 Creating Discs