TOC | INDEX |
•Print Settings will launch the Printer Driver settings when clicked. These settings are described in detail in Section D: Printer Settings on page 38 of this manual.
•Print disc before recording is recommended for most jobs to avoid printing on discs that do not burn properly.
•Record disc before printing is used for jobs involving Hockey Rink or Business Card shaped
•If using Kiosk Mode, choose whether or not to Print "Reject" on Bad Discs in Kiosk Mode. When enabled, this will cause a disc that has failed to verify to be printed with the word REJECT prior to being ejected from the publisher to make it easier for bad discs to be identified in the output stack when using the Kiosk Mode. If this option is not enabled, bad discs will be ejected with no printing at all.
•Number of discs requested for this job are selected here.
•Stop Job after Number of Writes Fail allows you to decide how many consecutive failures the Publisher will accept prior to canceling a job.
5.Once you have selected your image and chosen your preferred settings in the Job Details Pane, click OK and your job will be submitted in the Queue.
6.Return to Discus' main menu by clicking on the Discus pane, bringing it to the foreground. Repeat the steps above for each individual to be queued.
7.Once all the jobs have been queued, click Start Jobs to begin burning and printing your queued jobs.
D.PRINTER OPTIONS
The following section will examine the printer driver settings that affect the print quality of your discs. While the default settings will fit most printing needs, it is a good idea to familiarize yourself with these settings to optimize your print quality. The printer driver settings are contained in two areas, Page Setup and Print Setup. You can access the driver settings as follows:
