Primera Technology II user manual Index, Rear Panel, D.System Requirements

TOC INDEX

Rear Panel

This illustration shows the input ports found on the rear panel of the Publisher:

USB 2.0 Port Power Input Port

The USB 2.0 Interface is connected to an open USB 2.0 port on your computer with a standard USB cable, included with your Publisher.

The Power Input Port connects to the included 100V~240V 12V switching power supply.

D.SYSTEM REQUIREMENTS

Before getting started, it is important for you to verify that your computer meets the recommended system requirements. Here's what you need in order to successfully burn and print with the Discribe software:

•G4 PowerPC 700MHz or higher running OS X version 10.2 or higher

•256MB RAM

•Free hard drive space of at least 2 GB (up to 6 GB for DVD)

•Available USB 2.0 Port

•Do not connect the Bravo to any USB hubs or the USB port on your keyboard. It should be connected directly to an on-board USB 2.0 port.

If your computer does not have at least these minimum system requirements, system performance may not be acceptable.

4 Getting Started