TOC | INDEX |
f.Print Settings will launch the Printer Driver settings when clicked. These settings are described in detail in Section D: Printer Settings on page 38 of this manual.
g.Set Print disc before recording/Record disc before printing. Record disc before printing is recommended for most jobs to avoid printing on discs that do not burn properly. Print Before Recording is used for jobs involving Hockey Rink or Business Card shaped
h.If using Kiosk Mode, choose whether or not to Print "Reject" on Bad Discs in Kiosk Mode. When enabled, this will cause a disc that has failed to verify to be printed with the word REJECT prior to being ejected from the publisher to make it easier for bad discs to be identified in the output stack when using the Kiosk Mode. If this option is not enabled, bad discs will be ejected with no printing at all.
i.Select the Number of discs requested for this job.
8.Stop Job after Number of Writes Fail allows you to decide how many consecutive failures the Publisher will accept prior to canceling a job.Once you have selected your image and chosen your preferred settings in the Robot Write Pane, click Start to begin recording your job. You can queue several different jobs for recording if you like, this option is described in Section D: Printer Settings on page 38 of this manual.
B.4. Streaming (Automated copying of multiple original discs)
Streaming is a new, powerful feature that allows you to backup multiple original discs quickly and easily. Streaming is done as follows:
1.Launch Discribe.
2.Select CD/DVD Copy.
3.Click Copy CD/DVD and select Streaming from the drop down menu.
4.Load input bins with the amount of blanks you want to record for each original followed by the original disc. Repeat until all originals are loaded. For example, if you have 5 different original discs and you wish to make 2
34 Creating Discs
