Printek MtP300 Series

Printer Configuration

Baud Rate Baud Rate

57600

Possible Values: 9600, 19200, 38400, 57600*

This feature sets the baud rate for the Serial interface. The value must match the setting used on the host

system.

Data Bits Data Bits

Possible Values: 7, 8*

This feature sets the number of data bits in the serial character frame. The value must match the setting used on

the host system.

Stop Bits Stop Bits

Possible Values: 1*, 2

This feature sets the number of stop bits included in the serial character frame. The value must match the

setting used on the host system.

Parity Parity

None

Possible Values: None*, Even, Odd

This feature sets the parity checking requirements for the data bits in the serial character frame. The value must

match the setting used on the host system.

XON/XOFF Handshaking XON/XOFF

Off

Possible Values: Off*, On

This feature enables or disables the XON/XOFF (DC1/DC3) character handshaking method used to control data

flow from the host system to the printer. When enabled, an XOFF character will be sent by the printer

whenever the printer’s input buffer is nearly full. An XON character will be sent whenever the printer��s input

buffer becomes nearly empty or if the control panel Setup Mode has been exited.