Printronix
RFID Label Guide Specification
915 MHz EPC Class 1, Gen 2
Rafsec Short Dipole Antenna
1.Scope
1.1.This document provides guide specifications for developing 96 Bit, EPC UHF Class 1, Gen 2, RFID labels with Rafsec Short Dipole Antenna for use with Printronix MP2 series of RFID printers.
1.2.Target Applications
1.2.1.Target application is supply chain logistics labeling using paper
1.3.Target RFID Printer Models
1.3.1.Printronix SmartLine SL4M MP2 and SL5000r MP2 series RFID Smart Label Printers. Printers are designed to encode, verify and print RFID labels.
1.3.2.Printronix SmartLine SLPA8000r MP2 and SLPA7000r MP2 series RFID Smart Label Printer Applicator. Printers are designed to encode, verify, print and apply RFID labels.
2.Disclaimer
2.1.Notwithstanding anything to the contrary in this document, the guidelines, suggestions and other information included in this document or otherwise provided to the recipient, including the guidelines and suggestions for developing converted RFID labels, are provided by Printronix on an "as is" basis and without warranty of any kind whatsoever, expressed or implied. In particular, Printronix disclaims any implied warranty of merchantability or fitness for a particular purpose. Printronix will not be liable under any circumstances for any damages or losses related in any way to use of the guidelines, specifications or other information, including damages, which may be incurred as a result of labels not working properly in a specific application. All specifications subjective to change without notice. Testing of the converted labels in the printer is recommended prior to production quantities.
3.Requirements
3.1.Label Facestock
3.1.1.Thermal Transfer printing mode – Coated label facestock designed for thermal transfer printing (Fasson Thermal Transfer 1C media or equivalent).
3.1.2.Direct Thermal printing mode – Coated label facestock designed for direct thermal printing (Fasson DirectTherm 200HD or equivalent).
3.2.Liner
3.2.1.40 # bleached calendared Kraft stock.
3.3.Adhesive
3.3.1.Permanent Acrylic or rubber based adhesives are acceptable
RFID Label Guide Specification
Gen 2, Rafsec Short Dipole Antenna
