PART DESCRIPTION
A. Loading lever
B. Reheat button
C. Defrost button
D. Browning control
E. Bagel button
F. Cancel button
G. Removable crumb tray
G
BEFORE USING FOR THE FIRST TIME
1.Remove all packaging materials including those that may be inside the toasting slots or toasting lever slots.
2.Wipe the exterior with a damp sloth. Dry thoroughly. Do not use abrasive cleaners.
3.Do not put the toaster, cord or plug in water.
4.Be sure crumb tray is pushed all the way into the back of the toaster and the toasting lever is in the UP position.
5.Unwrap power cord from cord storage area on underside of toaster and plug into a 120V AC outlet.
6.Turn the browning selector knob to (1), the lightest setting.
7.Lower both of the toasting levers until they lock in place. Operate without bread once or twice to burn off any manufacturing residue. You may notice a light amount of smoke; this is normal and will stop as the heating elements continue to heat.
bowl first. Start with the lowest setting and gradually increase as the cream begins to thicken.
NOTE: If the power supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
